GE Aviation Aircraft Maintenance Technician vacancies (Apply Now)

 GE Aviation Maintenance Technician

Job Description

• Perform preventative maintenance on production equipment using Maximo software 
• Repair all production equipment as needed 
• Perform breakdown analysis 
• Perform general housekeeping 
• Upgrade production lines with new equipment/technology 
• Work with outside contractors working on assigned line 
• Comply with GMP, safety, and audit standards 
• Work independently under limited supervision (self-management) 
• Documentation of work schedule and work tasks completed

Qualifications/Requirements:

• High school diploma or equivalent 

ELIGIBILITY REQUIREMENTS

• Must be able to lift up to 25 pounds repetitively, occasionally lift up to 35 pounds non-repetitively, and sometimes lift over 35 pounds with assistance 
• Conform to all EHS guidelines including, but not limited to, wearing proper PPE; Work in an area where there may be moderate noise intensity (85 to 89.9 dBa) and areas where hearing protection is required; Work in an area where, due to normal machining operations, there may be dust, fumes, or smoke (not over OSHA Permissible Exposure Levels)

Desired Characteristics:

• 5 Years Mechanical Maintenance Experience with a preference of an electrical/HVAC knowledge base  
• Strong troubleshooting skillset; pinpointing and fixing breakdowns, diagnostics, and problem solving 
• Ability to read and apply knowledge from schematics, product manuals and mechanical drawings 
• Preventative maintenance background using computerized preventative charts and data 
• Material fabrication, basic rigging, and welding skills 
• Experience with: 
  • Electricity & Electrical systems from 480v 3 phase - 24v control 
    • Working with starters, fuses, contacts, relays in basic electrical systems; installation and frequency drive experience preferred 
    • Electronics (e.g., level probes, flow meters, drives/VFDs, etc.) 
  • Mechanical systems  
    • Chains, sprockets, motors, seals, bearings
    • Gearing and gear boxes (rebuilds, ordering parts, machining parts) 
  • Hydraulic systems (high pressure cylinders, pumps, valves) 
  • Kinematics (e.g., line speed/sprocket size ratios, etc.). 
  • PLC (e.g., industrial maintenance, computer control systems, etc.) 
  • Pneumatics (solenoids, cylinders, motor brakes, reading) 
  • Pumps (replacing seals/motors, understanding specs)  
  • Drive Components, Belts, chains, Clutches & Brakes, etc. 
• Ability to work in a collaborative team environment including non-maintenance personnel  
• Knowledge of ISO Quality Standards as well as safety procedures, PPE, Lockout/Tagout, etc.

Apply Now